Chapter 17: The coin-type electromagnetic rifle exposed!

After all, the organization that detects handwriting is a formal organization, and it represents a fair legal organization.

At this time, the handwriting detection report all indicated that the handwriting was indeed from March half a year ago, which naturally made many pictures emerge in the minds of many smart people.

So it didn’t take long before various UP hosts added the contents of this handwriting report to their videos, causing a huge uproar!

In addition, after the UP owner patiently searched for information, they discovered that the patents originally applied for by Xingtu Technology actually included patents for a partial frame-type architecture and a cross-type architecture!
You should know that these two architectures appeared in the design draft drawings in early March. Although the appearance is different, the core is the same!

Xingtu Technology itself does not produce such products, so why did it register a patent in this area? After seeing this news, people became more suspicious.

First, the handwriting proved that it came from March, and then they mysteriously registered a patent in this area when they clearly had no products...

At this point, even those who don’t believe that Lin Feng plagiarized or is a patent thief will believe it after seeing these evidences.

Therefore, in every video about handwriting robots, the comment section is full of comments cursing Raymond Lam and accusing him of being a patent thief.

As a result, the real Xiaohe Town has gradually become the subject of controversy and discussion.

After all, according to the previous news, many young people in Xiaohe Town who discovered the new world have also become users of Bilibili.

In this situation, as young people told their parents or friends about the relevant things, voices of criticism and discussion naturally arose everywhere in Xiaohe Town.

Whether online or in real life, there is no evidence to prove that Lin Feng has any relationship with Zhisuo Technology.

But it is inevitable that there is an unknown connection between Lin Feng and Zhisuo Technology's handwriting robot design draft drawings.

Faced with unanimous suspicion and questioning, and faced with a host of negative public opinion, the next afternoon, Raymond Lam released his new video directly on Bilibili and Youku.

This naturally led many netizens on Bilibili and Youku who were paying attention to this matter to click on the video and check out its content.

"In the past two days, many UP hosts on Bilibili have tried to smear me based on some so-called evidence without investigating the truth of the matter.

They posted videos that defamed me on websites and apps such as Bilibili, Youku, and Tudou.

Such behavior is quite ridiculous. The following video will tell them how ridiculous their groundless speculation and smearing are.

Of course, everyone must be curious about what I have been doing during this period of time, so now is an early advertisement.”

As Lin Feng finished speaking, the screen went black, and then a 3D model of a toy gun appeared. Next to the 3D model of the toy gun was written "Coin-type electromagnetic rifle".

“In the past period of time, or since I developed the handwriting robot, in addition to taking time to develop and upgrade the handwriting robot based on the questions raised by consumers, in fact, most of my energy has been used to develop the coin-type electromagnetic rifle.

This coin-fired electromagnetic rifle is an electromagnetic rifle specially designed for riot control and maintaining public order.

Its power is lower than that of a pistol. After hitting the target, it can cause bruises and pain on the target's limbs, making the target lose resistance. Unlike a pistol, it does not require the target to be rushed to the hospital for emergency treatment immediately after being shot.

So this is a weapon specifically used for riot control and maintaining public order.

With it, patrol officers and police officers don't have to be restrained when shooting, and don't have to worry about accidentally killing someone and then having family members and friends cause trouble.

With it, patrol officers and police officers no longer have to risk their lives by fighting armed gangsters and thieves with riot batons.

We can knock down the enemy remotely within 15 meters and make it lose its resistance."

At this point, Lin Feng said with inexplicable emotion:

"The difficulty of developing a coin-type electromagnetic rifle is far greater than that of a handwriting robot, although it seems to be simpler. But it is actually very difficult to make it practical. It is no exaggeration to say that the difficulty and cost of developing a coin-type electromagnetic rifle is a hundred times that of a handwriting robot.

You may not know that just to design a coil model that can perfectly fit the coin structure, the cost of renting a supercomputer for calculations alone was 70!
After spending such a huge amount of money, the ultimate goal is just to make a small coil generate 3.3 joules of kinetic energy on the coin!

Fortunately, after a month of hard work, we finally achieved results. With the help of a special coil that can generate 3.3 joules of kinetic energy for the coins, putting them in a row can generate 36 joules of energy.

The ultimate research and development goal was to achieve the ability to hit a person with a coin within 15 meters and cause him to lose resistance.

Of course, the reason why I chose to publish this information is that hundreds of related patents have all passed the preliminary review this morning.

You can search for the patent on the patent website, so it’s no big deal that it’s exposed at this time.

I am currently purchasing materials and looking for processing manufacturers to expedite the production of the parts I need and finally complete the assembly.

About half a month later, I will release a test video on Bilibili and Youku, and everyone can see the actual combat effect of the coin-type electromagnetic rifle I developed.

But let’s get back to the topic of handwriting robots.”

As Lin Feng spoke, the video screen suddenly changed. It was a picture of an engraving machine!
"Why does this thing look so much like a handwriting robot? And why don't you continue talking about the electromagnetic rifle?"

A barrage appeared in the barrage of B station, and soon afterwards, similar barrages also appeared rapidly.

Obviously, people were very interested in the electromagnetic rifle that Lin Feng mentioned. They thought it was very powerful and wanted Lin Feng to continue talking about it.

But the continuously playing video did not wait for them. Lin Feng appeared next to an engraving machine and then continued:

“Everyone must be curious about where the inspiration for my handwriting robot design came from. The inspiration actually came from the engraving machine!

When I was studying at Qinghua University, I majored in automation, and I was interested in control systems and robotics...

A year ago, our class visited and learned about the working principle of an automatic woodworking engraving machine. At that time, I exclaimed in public that if it was shrunk and had a pen added, wouldn't it be able to write?

If successful, you won't have to buy expensive printers or expensive printing ink anymore.

But when my classmates heard my idea, they all laughed. Then a male classmate said that my idea was simply crazy and that it had no commercial use at all. It was a waste of time and energy...

You can ask dozens of my classmates about this matter. There should be quite a few of them who still remember it.

So it all started that afternoon a year ago, on a woodworking engraving machine.

Although other people just laughed and didn't take it seriously at that time, I wrote it down and the more I thought about it, the more feasible it seemed to me.

In the end, after graduating from Qinghua University, I did not look for a job, but returned home to develop a handwriting robot.

When Xie Yun, an engineer at Zhisuo Technology, designed the handwriting robot, I think he must have understood the structure of the engraving machine before drawing those design drafts. "

At this point, the video began to switch to pictures of engraving machines with different structures.

Netizens looked at the picture above and found that the engraving machine picture in the video was actually consistent with the three handwriting robot architectures applied for by Xingtu Technology.

The two sides only differ slightly in appearance, but their core architecture is basically the same!

(End of this chapter)