As for what the method is, the method is to use source points to quickly obtain product knowledge.

The source point is a system different from the experience value system. Compared with the experience value system, it has a lower cost because it does not require the production of a physical product but only provides knowledge.

The source points correspond to technologies and products with different R&D difficulties, and the source points of consumption are also different.

In general, we still follow the principle that the higher the difficulty of developing a technological product, the greater the source of consumption.

In the past few years, he has used source points several times, and the current maximum limit of source points has been increased to 5000 million.

I wonder if I can use the source point to directly obtain knowledge about the five-axis machining center this time?

Out of curiosity, after saying goodbye to Liang Mengsong, Lin Feng began to formally learn about other five-axis linkage machining centers around the world in preparation for developing his own five-axis linkage machining center.

The reason why we still need to learn is because the source point still follows an unspoken rule.

That is, the more knowledge Lin Feng masters or the lower the difficulty of human beings currently developing this technology, the lower the cost of upgrading experience points.

In addition, if Lin Feng has an idea of ​​the technical development direction for the products to be upgraded or deliberately favors that direction during promotion, then the upgraded products will be upgraded in that direction.

So after learning that the first task was to develop a five-axis linkage machining center, Lin Feng did not immediately start using the source point to acquire knowledge about the five-axis linkage machining center.

Instead, we first learn about the world's five-axis machining centers and other technical knowledge in machining.

Only after having a specific idea for the development of a five-axis machining center can we use the source point to obtain relevant manufacturing knowledge.

Fortunately, with the help of the third-generation gene enhancement drug, Lin Feng's IQ reached 230, not to mention that he possessed strong memory and comprehension abilities.

Thanks to the characteristics of hummingbird genes, they have an ability similar to brain overclocking, and their thinking speed and problem-solving speed in one second are several times that of others.

Finally, Lin Feng deliberately compressed his sleep time and slept less than seven hours a day.

So it only took two weeks for Lin Feng to become one of the experts in the field of five-axis linkage machining centers.

As a result, the plan on how to develop the Xingtu Technology version of the five-axis linkage machining center is becoming clearer and clearer.

Finally, on December 2015, 12, Lin Feng used the source point to materialize the technical knowledge of the five-axis linkage machining center.

Then, in just a moment, the 5000 million source points were instantly cleared, and Lin Feng's mind was instilled with a huge amount of information, making Lin Feng feel a little dizzy.

Sensing the knowledge in his mind, the smile on Lin Feng's lips grew bigger and bigger, because according to the knowledge in his mind, the Xingtu five-axis linkage machining center perfectly achieved his idea.

However, Lin Feng soon fell into distress, because the manufacture of a five-axis linkage machining center was possible based on Daxia's current materials and processing technology.

But the problem was that he had to personally build the mechanical drawings of the five-axis machining center and the model library of how to let artificial intelligence Jarvis control the five-axis machining center.

Thinking of this, Lin Feng smiled bitterly and started working quickly. He drew the blueprints of mechanical parts for the relevant factories to process, while he was busy training the artificial intelligence Jarvis.

Time passed slowly, and in the blink of an eye, 2015 was over, and it was the even more eventful January 2016, 1.

On this day, Raymond Lam quietly released a new video. As soon as the video was released, the number of clicks and views skyrocketed with the top traffic recommendation resources.

"Hello, fellow fans and friends. We meet again after several months." Raymond Lam greeted the netizens, and then without waiting for people's reactions, he directly revealed the theme of the video.

“The product I am going to introduce this time is not a product for the consumer market, but a product for the machining field.

As for what this thing is? This thing is the Xingtu five-axis linkage machining center! "

"Five-axis machining center?"

After hearing Lin Feng's words, netizens around the world who were watching the video through the four major video websites, Bilibili, Tik Tok, YouTube, and Penguin Video, immediately showed disappointed expressions.

Because the five-axis linkage machining center is no longer a super black technology in this era.

Even Daxia, a formerly very backward region, has its own five-axis linkage machining center. Naturally, the five-axis linkage machining center is nothing in this era.

Although there are still very few countries that can actually produce five-axis linkage machining centers, it is a fact that this is not some super black technology.

In this disappointed state of mind, many people have the idea of ​​turning off the video.

After all, what’s so interesting about the video of the outdated mechanical processing product, the five-axis linkage machining center? It’s better to turn it off.

But before the netizens could really turn off the video, Lin Feng's words in the video instantly made them stop what they were doing, and a hint of curiosity arose in their hearts.

“I wonder if you have heard of Industry 4.0?

It has been more than five years since the theory of Industry 4.0 was proposed. The so-called Industry 5 is the fourth industrial revolution!
Industry 1.0 is the steam engine era, Industry 2.0 is the electrification era, and Industry 3.0 is the information era.

Industry 4.0 is an era of using information technology to promote industrial transformation, that is, the era of intelligence.

Simply put, the manufacturing sector will have highly networked, intelligent and automated production, which means that fully automated production machines and robots will be used on a large scale.

In this process, fully automated production equipment and robots are used that can work non-stop.

Human productivity will explode on a massive scale, and everyone's life will eventually become better, just like the previous industrial revolutions.

Of course, there will be pain during this transformation.

Because many workers will find that apart from basic labor, they have no way to beat the productivity and labor costs of machines.

If ordinary workers want to adapt to the Industry 4.0 era, they can only study hard.

Then become a maintenance technician, engineer, quality control technician, R&D personnel, scientist, and salesperson in a fully automated factory.

Or switch to other industries, such as scientific research, Internet industry, programmers, finance, entertainment, service industry...

During this process, there will be a short period of pain and discomfort, but after the pain there will be a bright future for the workers.

Because productivity has skyrocketed, production costs have been massively reduced, which also means that resources can be collected to a greater extent and at a lower cost.

Many development projects that used to be in harsh environments or were costly, such as those located in space, deserts, Gobi, oceans, the seabed, and deep underground, can now be started. (End of this chapter)