Chapter 84 Incredible Precision! (3rd update)
So in theory, a capable individual developer can also develop a laser engraving machine by himself, which shows how low the threshold is.

Of course, although the threshold is low, there are currently no well-known companies doing this. Only small companies with a few dozen people are doing these things.

Among them, those small companies actually infringed on some of Xingtu Technology’s technical patents.

Although one of them is a laser engraving machine and the other is a handwriting robot, their structures are the same. It is difficult for them to avoid infringement of the straight structure and the partial frame structure.

However, Xingtu Technology does not have the energy to deal with them, and the leeks have not grown mature. If Xingtu Technology wants to deal with them, it can rely on the fact that they infringe on technology patents.

At that time, they will either lose money or pay company shares in exchange for relevant architecture patent authorization!

This is also the plan of Qu Qiongying, general manager of Xingtu Technology. After all, Xingtu Technology does not have the energy to enter the niche market of laser engraving machines.

It would be nice if we could use patent authorization for a linear or frame-based structure in exchange for a large stake in a company with potential in the laser engraving machine field.

After all, the market for laser engraving machines is too small and there is not much money to be made in it. Xingtu Technology cannot possibly waste time and energy on these things.

Of course, Lin Feng's purpose in mentioning this topic is not to remind others that they can enter the field of laser engraving machines, but to say with a hint of meaning:

"Flat laser engraving alone cannot bring out the capabilities of our Xingtu Z1 robot arm, so I decided to temporarily add more dishes to showcase its greatest features on the basis of the original one."

When Lin Feng finished speaking, a staff member handed over a specially made "I"-shaped metal block.

“This is a metal block in the shape of an “I”. If you want to use the modified third-generation PenMaster handwriting robot to carve the same five-pointed star on both sides of the inside, it will be a disaster.

But this thing is very easy for our Xingtu Z1 robot arm, so I decided to add a little extra effort and laser engrave a five-pointed star set by the experts on both sides of the inner side of this "I"-shaped metal block!"

"Wow!"

When Lin Feng's words were heard, there was an uproar at the scene.

At the same time, there were also shocked remarks in the live broadcast room.

"Oh my god, this Lin Feng is really crazy, he actually took the initiative to add more dishes to make things difficult for me!"

"My goodness, Lin Feng would actually do this!"

"Awesome! Lin Feng is so awesome."

“I think this difficulty is not a big deal for a robotic arm, after all, this robotic arm has six-axis processing capabilities.

It was a bit simple to just let it carve on a flat surface. Those experts probably didn’t want to make it too difficult for Lin Feng, so they just gave him a basic task.”

"That's right. The difficulty level Lin Feng proposed at this time is in line with the difficulty that a robotic arm should have."

"No matter what, Lin Feng's behavior of actively increasing the difficulty should be applauded!"...

After hearing Lin Feng's words in the live broadcast room, everyone became excited and started talking.

They were extremely impressed by Raymond Lam's initiative to increase the difficulty, and they called Raymond Lam an awesome guy, saying that Raymond Lam was worthy of being Raymond Lam.

Lin Feng had no idea what was happening in the live broadcast room. When the laser engraving was completed, he directly used the tool to take out the thin metal plate and threw it into the water to cool it down.

Afterwards, Lin Feng did not hesitate and directly placed the "I"-shaped metal block at the fixed position. Following the prompt of the fake artificial intelligence Jarvis, he gave the order to start work.

At the same time, the people at the scene and the millions of netizens in the live broadcast room were not paying attention to the "I" metal block that was being carved. Their attention was all on the thin metal plate that had been carved earlier. After all, the thin metal plate had been processed and was about to be tested.

I wonder if the laser engraving accuracy of this robotic arm can really reach 0.02mm to 0.04mm?
Experts, company representatives, reporters and millions of netizens in the live broadcast room all showed expectant and curious eyes.

"Let me measure it."

Jiang Lan, an expert in the field of intelligent manufacturing, directly grabbed the thin metal block, then picked up a digital caliper produced by Mitutoyo Corporation of the island country, with a measurement resolution of 0.001mm and an actual measurement accuracy of up to 0.005mm, and began to measure.

In this regard, although many experts on the scene were somewhat unhappy about not being able to measure it themselves, they did not argue with Jiang Lan, but let him measure it first.

As for the people at the scene or netizens in the live broadcast room, their expressions were different. Some of them could understand the measurement parameters above, while others could not.

Those who don’t understand will wait patiently, and those who can understand will keep their eyes open wide.

Because through the parameters displayed on the digital caliper and the parameter requirement diagram just discussed by the experts on the desktop, they found that the laser engraving accuracy was actually 0.02mm, and the maximum error did not exceed 0.025mm!

It seems that the regular processing accuracy of the Xingtu Z1 robotic arm controlled by artificial intelligence Jarvis is between 0.02mm and 0.025mm, not 0.04mm.

It is estimated that only in bad environment or some special circumstances will it be reduced to 0.04mm!

How could those who know how to use digital calipers not be surprised when they learn of this result?
However, the measurement is not completed yet, and there will be in-depth testing next, after all, it is based on the requirements discussed by the experts.

In this five-pointed star, the depth of each corner is different. Only when the laser engraving depth is qualified, the task is completed.

Just like that, as the diameters of each angle of the five-pointed star were measured and written down with a pen, Jiang Lan then began to measure the depth of the five-pointed star.

In the end, there were no surprises. The accuracy of the laser engraving depth was all between 0.02mm and 0.025mm, and the performance remained as stable as ever!
As Jiang Lan, an expert in the field of intelligent manufacturing, announced his measurement results, there was an uproar at the scene and in the live broadcast room, followed by warm applause.

"Pah, pah, pah, pah, pah, pah..."

As the applause rang out, millions of netizens in the live broadcast room became completely excited and called Lin Feng awesome.

At this time, Jiang Lan's voice full of emotion also came out:

"Speaking of which, Mr. Lin Feng did create a miracle.

You should know that there are many companies currently developing robotic arms, such as FANUC, Yaskawa, Epson in Japan, Kuka in Germany, ABB in Switzerland, Mobis in South Korea, Comau in Italy...

Among the many companies developing robotic arms around the world, although their repeatability accuracy is 0.01mm to 0.02mm, in actual operation, the best can only achieve 0.1mm.

At this time, the processing accuracy of the robotic arm controlled by the artificial intelligence Jarvis reached between 0.02mm and 0.04mm, which undoubtedly broke the upper limit of the accuracy of the robotic arm and created a miracle.

This miracle is not only a miracle for Daxia, but also a miracle for the whole world. After all, we have raised the processing control accuracy of the robot arm to a new peak!"

"Making love……"

Along with Jiang Lan's emotional words, the people at the scene applauded again, cheering for Lin Feng and the artificial intelligence Jarvis and robotic arm developed by Lin Feng.

In this regard, Wang Gaoyuan in the live broadcast room felt as if his face was hit and his face looked ugly as if he had eaten a piece of yellow unknown substance.

He had previously ridiculed the so-called artificial intelligence Jarvis and robotic arms as a joke. Was this slap in the face coming too quickly?
　First set 438, average set

　　
　
(End of this chapter)